The Most Common Toilet Problems and Their Reasons

We all know that among the various plumbing issues, toilet problems can be the most messy and time-consuming ones. The slightest issue in your toilet can be a major disruption, and it is essential that you get it fixed as soon as possible.

It is thus important that you know some of the common toilet problems and their causes to better understand your household issues, and call a professional if you are not in a position to do it yourself. Here are the most common toilet problems and their reasons.

Water Flowing Into the Tank

You may come across a continuous hissing sound from your toilet. This is most likely water flowing into the tank and is caused by the water flowing via the inlet valve. In this case, you need to check for parts such as the refill tube, the inlet-valve assembly or the ballock, and the float. Adjust the float if it is not sticking properly and the refill tube should not be placed too deep into the overflow tube.

If you problem does not get solved by either of these two methods, you will most likely have to get the ballock part replaced.

Water Dripping From Water Tank

Another water tank problem that you may experience is that the water continuously fills and then drips. This may result from a problem with the syphon due to incorrect or poor installation of a new tank fill valve.

In a water tank, there is a flexible and small tube that extends all the way from the bottom of the valve to the surface of the overflow tube. As water is being filled into the tank, water is also used from this tube for refilling purposes. However, if this tube goes inside the overflow tube, it can cause water from the tank to drip.

The solution for this is to install the new toilet valve using a clip. The clip prevents the flexible tube from getting inside the overflow tube.

Weak Flush

Another problem you may experience is that the water does not flush quickly enough. This could be due to the holes that are underneath the bowl rim becoming clogged, in which case you will need to get rid of the debris from each flush hole using a piece of curved wire. Be sure to use a small piece of mirror to see clearly under the under-rim and avoid touhcing the bowl when removing debris. If the bowl gets scratched, it can lead to further problems.

If your toilet is more than 20 years old, the problem of weak flushing could be due to hard water deposits that have cemented in the syphon jet-hole. If this is the case, you will need to get it cleansed using a muriatic acid wash and should be done by a professional since it is corrosive and poses various health hazards as well as damage to your toilet bowl.

If you are looking for trained and professional plumbers in Frederick Maryland or plumbers in Columbia, MD, we at youroneplumber.net can offer you flexible plumbing services. Please get in touch with us today or contact us for enquiries.